機型適用 Application

濾油機適于于物料在全面實施滾涂、涂裝、淋涂后面上漆中配制劑、氣泡圖片的釋放流平，第二非常干燥。 This machine is suitable for volatilizing and leveling of diluents and bubbles in the surface coating after roll coating, spray coating and shower coating, and then drying.

工作原理 Working principle

設備在施行滾涂、粉末噴涂、淋涂后，流過可以調節節攝氏度的控溫所謂的隧道，設備步入之前時表層金屬涂料中配制劑、小氣泡還會蒸發掉流平，步入后面在較高攝氏度下（或UV固定機），設備就對其進行了晾干。 After the product is applied by roller coating, spray coating and shower coating, it flows through a constant temperature tunnel with adjustable temperature. When the product enters the front stage, the diluent and bubbles in the surface coating will volatilize and level, and enter the rear end at a higher temperature (or UV curing). Machine), the product is dried.

機型特性 Characteristics

隧道施工高溫可不同物料都要選用、轉換，適合很多油漆涂料的高溫技藝條件。 運輸速率可變性頻調高，滿足各項藝術涂料的流平時光新工藝狀態。 The temperature of the tunnel can be set and adjusted according to the product requirements to adapt to the temperature conditions of various coatings. The conveying speed can be adjusted by frequency to adapt to the leveling time process conditions of various coatings.